Skip Ribbon Commands
Skip to main content

The EZCarry System

EZCarry

Key Features of EZCarry System

Click on the blue hotspots to discover more about this unique system

close

Optional Adapter

Optional RYK Adapter allows additional pre-fab capabilities
close

30% Lighter

30% lighter system provides a safer and faster installation
close

Extended Vent

Extended Vent fully engages standard and heavy-duty no-hub bands
close

500 Pound Load Rating

500 pound load rating with 1/2" rear anchor system
close

Convenient Height Indicators

Convenient height indicators reduce installation time
close

Optimized Waterway

3" optimized waterway propels waste to virtually eliminate clogging
close

Universal Foot

Universal foot accommodates common pre-fab construction methods
close

Segmented Break-Off Tab

Segmented break-off tab for low rough-in toilet applications
close

Self-Adhering Gasket

Proven self-adhering gasket speeds installation
close

Identifier

Identifier for right and left hand fittings
3X Farther

Industry leading line carry ensuring waste evacuation for low-flow installations.
30% Lighter

Install faster with labor saving features and reduced system weight.
500 lb
Load Rating

Maximize durability with heavy-duty standard load rating.

Performance Solutions

Third party testing revealed Zurn's new EZCarry design far out paces the line carry of traditional systems. The optimum line carry comes from the Zurn package, with best in class line carry.

Modified Line Carry Testing*

3X Farther

Industry leading line carry ensuring waste evacuation for low-flow installations.
30% Lighter

Install faster with labor saving features and reduced system weight.
500 lb
Load Rating

Maximize durability with heavy-duty standard load rating.
Standard Coupling with Integral Test Cap

3" diameter x 6" standard polymer coupling with integral test cap(NPSM only).
Click on couplings below to view on carrier and get detailed information
Standard Coupling with Integral Test Cap
CC Corrosion Resistant Cast Iron Coupling
CE EZ-SET® Coupling (Patent Pending) with Integral Test Cap
CL Custom Length Standard Coupling with Integral Test Cap
CS 2 1/4" Polymer Coupling with Integral Test Cap
Get Organized

Organized Packaging keeps rough-in and finish hardware separate to eliminate lost parts on the job!

Prefab Features

Universal feet accommodate most pre-fab installation methods, allowing assembly off the job site with additional RYK option available for unistrut assembly.

EZCarry® Carrier System – Frequently Asked Questions

Expand Collapse

What is the standard Z1201 / Z1202 EZCarry coupling option?

The Zurn 'ZZ' polymer adjustable coupling with integral test cap is supplied in a 6" [152mm] length as standard; however, the Z1201 / Z1202 EZCarry Carrier System is available with additional coupling options:
-CC Corrosion Resistant Cast Iron Coupling (2-1/4 [57] to 12 [305])
-CE EZ-SETTM Coupling (Available 6 [152], 12 [305], or Longer when specified. Minimum usable length = 5 [127])
-CL Custom Length Standard Coupling with Integral Test Cap (Specify Length 4 [102], 8 [203], 10 [254], 12 [305])
-CS 2-1/4 [57] Polymer Coupling with Integral Test Cap

Expand Collapse

Can I get a custom length coupling for the Z1201 / Z1202 EZCarry Carrier System?

Yes, the standard adjustable coupling with integral test cap is available in 4", 8", 10" and 12" [102, 203, 254, 305mm] sizes by ordering your carrier with the -CL option. For extended lengths, the -CE EZ-SETTM Coupling may be ordered.

Expand Collapse

When should I use the –CE EZ-SET® Coupling?

The patent-pending EZ-SET® Coupling incorporates an innovative installation process, allowing the coupling to be cut to length after the finish wall is in place without unscrewing the coupling. After cutting the coupling flush with the wall, simply glue on the included adapter flange for a perfect fit, saving time on the jobsite. Minimum -CE coupling length is 5" [127mm]. Other options are available for applications requiring couplings less than 5". Contact Zurn Engineering for details at 1-855-663-9876.

Expand Collapse

What tool should I use to cut the EZ-SET®coupling?

An oscillating cutting tool should be used to cut the coupling. A reciprocating saw or hacksaw may also be used. The foam ring was damaged on my Z1201 / Z1202 EZ-SET® Coupling. What are my options? The foam ring on the EZ-SETTM Coupling is a commercially available product. Material may be purchased from McMASTER-CARR or similar industrial suppliers.

Expand Collapse

The foam ring was damaged on my EZ-SET® coupling. What are my options?

The foam ring on the EZ-SET® coupling is a commercially available product. Material may be purchased from McMaster or other industrial supplier.

Expand Collapse

When should the Z1201 / Z1202 EZCarry EZCUTGUIDE be used?

The Zurn Z1201 / Z1202 EZCarry EZCUTGUIDE is used when the EZ-SETTM Coupling (-CE coupling option) is selected. The EZCUTGUIDE ensures a straight cut and protects the finished wall from the saw blade while the coupling is cut to length.

Expand Collapse

What makes the line carry on the Z1201 / Z1202 so much better than traditional carrier systems?

Advancements in computer-aided hydraulic design allowed Zurn Engineers to develop a 3" coupling and optimized fitting combination, resulting in an increased velocity through the carrier system, thus leading to farther line carry.

Expand Collapse

What is the standard load rating for the Z1201 / Z1202 EZCarry carrier system?

The EZCarry system has successfully passed a 500 lbs. load rating when tested according to the requirements of ASME A112.6.1M-1997. For more detailed information, please visit the IAPMO website for the third party certification.

Expand Collapse

What valve and bowl pairings are most efficient with the Z1201 / Z1202 EZCarry system?

The Z1201 / Z1202 EZ CarryTM water closet carrier system can be used with virtually any standard 1.28 or 1.6 GPF bowl/valve combination, though The Zurn EcoVantage® 1.1 GPF ZTR Sensor Wall Bowl System provides superior water conservation and enhanced line carry.

Expand Collapse

Can I use the EZCarry™ system with other manufacturer’s valves and bowls?

Yes, the EZCarry™ system can be used with other fixtures, however for superior water conservation and performance the Zurn EcoVantage® 1.1 gpf ZTR Sensor Wall Bowl System is preferred.

Expand Collapse

Which Z1201 EZCarry fitting option should be selected when installing a urinal back to back with a water closet?

The -JC option allows a urinal to be installed back to back with a water closet. The -JC option is available on the Z1201-NL4 and Z1201-NR4 carrier models.

Expand Collapse

What pre-fab features does the new Z1201 / Z1202 EZCarry carrier system have?

The Z1201 / Z1202 EZCarryTM carrier system can help facilitate a pre-fabrication process through several featues. The feet have been designed to accept angle iron for carrier banks, while the optional -RYK adapters can be used if attaching to Unistrut. The decreased weight will reduce the overall weight of the carrier bank once assembled.

Expand Collapse

Are REVIT, 2-D and 3-D models available for the Z1201 / Z1202 EZCarry system?

Yes, REVIT, 2-D and 3-D models are available for all base carrier models. Click the attached link to view the Zurn CAD library.

Zurn CAD Library http://www.zurn.com/Pages/Bim-3d-Models.aspx

Expand Collapse

If a standard Z1201 / Z1202 EZCarry trim kit has been ordered, can the RYK option be added later?

Factory assembled trim kits with -RYK feet can be ordered by specifying part number P1201-RYK-TRIM, or the -RYK option can be ordered separately as an add-on accessory to a standard trim kit by ordering part number P1201-RYK-FT-ADPT.

Expand Collapse

Is there a cross reference guide that converts the original Zurn Z1203 / Z1204 systems to the new Z1201 / Z1202 EZCarry systems?

Yes, a cross reference guide is located on the Zurn website under the "Tools and Resources" tab, or by following this link: http://www.zurn.com/Pages/CrossReferenceCategories.aspx

Expand Collapse

Is the Z1201 / Z1202 EZCarry system listed with any compliance agencies?

Yes, the Z1201 / Z1202 EZCarry system has been tested to the requirements of ASME A112.6.1M-1997 and is listed with IAPMO.

Expand Collapse

Can the Z1201 / Z1202 EZ Carry system be used in retro-fit installations?

Yes, the Z1201 / Z1202 EZCarryTM systems can be used in retro-fit applications. Zurn recommends the use of 1/2" anchors to secure the carrier system to flooring structure in both new and retro-fit applications for maximum load carrying capability.

Expand Collapse

When should / can the Z1201 EZCARRY-HANDLE be used?

The EZCARRY-HANDLE is an innovative product that simplifies the task of transporting and setting carriers into place on the jobsite. The EZCARRY-HANDLE is designed to work with all Z1201 carriers except those using a back-to-back "double" fitting. The EZCARRY-HANDLE should be used with the studs removed from the faceplate.

Expand Collapse

Are Contractor packs available for the Z1201 / Z1202 EZCarry System?

Yes, Contractor packs are available for the Z1201 and Z1202 EZCarry carrier systems. Contractor packs organize components, reduce packaging materials, and save valuable space on the jobsite. Contractor packs can be ordered by using the following product numbers: Z1201-CONTR-KIT; Z1201-CONTR-KIT-RYK. For more information, contact your local Zurn Sales Representative or Customer Care Associate for more information.

Expand Collapse

Is the Z1201 / Z1202 EZCarry system listed with MasterSpec?

Yes, the Z1201 / Z1202 EZCarryTM Carrier Systems along with many other Zurn products are listed within MasterSpec and can be viewed at the following web address: Zurn on MasterSpec

Expand Collapse

Are there Buy-America options available for the Z1201 / Z1202 EZCarry System?

EZCarryTM Systems which meet the requirements of Buy-America are available. Please contact your local Zurn Sales Representative for specific availability based on the required fitting type.

Testimonials

The EZCarry system has been installed in new construction, retro-fit and pre-fab applications with proven performance. Trust Zurn to offer labor saving products that save you time and money.

Retrofit
  • Maximize water savings with 1.1 GPF while enhancing line carry with Zurn paired performance systems
  • Rely on Zurn for readily available parts during restrooom renovations
New Construction
  • Keep your jobsite safe with lightweight carrier system and ergonomic handle for easy transportation
  • Simplify product installation with patent pending front cut coupling
Pre-Fabrication
  • Easily create carrier banks with standard angle iron attachment and options for Unistrut assembly methods
  • Minimize transportation damage with robust carrier design featuring 1/2" rear anchor rod and lock washers
VIEW ALL PRODUCTS IN THE EZCARRY LINE

"With the compact design and the light weight, I would recommend this installation to anyone."



-NC Plumbing and Consulting

"Very pleased. The legs were already set so I didn't have to put the legs on. The bolts were already set and the installation instruction packets were easy to read."



-Regency Park Corporation Installation

"In my 26 years of experience as a plumber I've done many carriers from various companies and the Zurn was more efficient, quicker, easier to understand, and all in all a better product."



-J.W. Danforth Company

System Accessories

EZCARRY-HANDLE

Convenient carry handle for Z1201-N and Z1201-H Systems

EZCUTGUIDE

Blade guide for EZ-SET coupling install and protection of finished wall.

Z1200-SPLY-SPRT-WC

Supply Line Support simplifies routing supply line to valve

Z1200-FINFRAME-SJ

Siphon Jet Finishing Frame provides fast solution for mounting water closet

Z1200-CC-TESTCAP

Test cap for use with cast iron coupling where a test cap is not integral

Z1200-CPLGWRNCH-3

Coupling wrench for use with Z1201/Z1202

Z1200-RI-GAUGE

Enables contractor to quickly ensure coupling is properly adjusted

Z1200-ADJ-NUT

Bowl Saver adjustment washers ensure rigid bowl installation, preventing cracking

Specification Sheets