Z886

Perma-Trench® Linear Trench Drain System

Find us in MasterSpec®

Zurn Z886 6" [152 mm] wide pre-sloped trench drainage system. High density polyethylene structural composite drain channel with .75% bottom slope. All sections are 80-inch modular lengths with integral top frame, inter-locking ends and radiused bottom. Combination tie-down/leveling devices at 20-inch intervals. Furnished with heavy-duty Dura-coated cast iron grate unless otherwise specified. USA configurable.

Read More

Where to Buy
  • Saves labor up to 75% – lightweight durable polyethylene construction
  • Integral rebar clips for elevation set
  • Longer, light weight sections
  • Mechanical interlocking connections

Media

Frequently Asked Questions

​Yes, we can create specials with different angles please contact your Zurn customer service representative for more information.​

The Z886 can handle water temperatures up to 140 degrees Fahrenheit.  If higher temperatures will be passing through the trench, the Z806 can handle water temperatures up to 150 degrees Fahrenheit, and the ZV806 can handle water temperatures up to 210 degrees Fahrenheit.​

There are two viable connection methods: 1. A bottom outlet can be used on the trench, piping over to the basin with standard pipe fittings. 2. We can fabricate a side outlet at the end of the last channel on the trench drain. Please contact Zurn Engineering for more information.​

Yes, the Z886 does have a UV inhibitor built into the plastic.​
Return to Top