P6000-AA-CP
|
Vacuum breaker nut P6000-AA-CP is made of Brass for Commercial usage. This Flush Valve Repair Part is made of stainless steel and with 3/4" inch NPT male type connector it is compatible with all ZTR flush valves.
|
|
P6000-B-HP
|
Prevent backflow and back-siphonage into potable water with a Zurn vacuum breaker. Constructed with our chemical-resistant GO BLUE® material, the vacuum breaker is built to last. GO BLUE® parts last up to 10x longer than the competitors’, reducing maintenance costs and extending their lifespan. The repair kit (part no. P6000-B-HP) works with AquaVantage® and AquaFlush® flush valves to keep potable water from becoming contaminated. When a vacuum breaker is needed for repair or maintenance, trust Zurn for genuine, reliable parts.
|
|
P6000-C31
|
O-Ring for Tailpiece P6000-C31 slides into the manual flush valve's control stop, where it creates a watertight seal. This is built to lasts 8-10 times longer than traditional black rubber components making it ideal for residential, commercial & industrial use.
|
|
P6000-D-SD
|
Stop Valve Repair Kit P6000-D-SD 1" works with sensor and manual flush valves. It is built with Zurn's Go Blue material ensuring resistance against chemicals. It fits 1 inch and 3/4 inch control stops and can be used with ZEMS G1, ZEMS G2, ZTR, ZTS6200EV, ZER6152, ZER6195, and stops Tailpieces.
|
|
P6000-E14
|
Molded Disc for Manual Flush Valve P6000-E14 is designed to fit AquaVantage® and Aquaflush® diaphragm flush valves. The flush valve molded disc can be used to upgrade any diaphragm flush valve.
|
|
P6000-EC13
|
Toilet flush valve Trip Mechanism for Closet P6000-EC13 is designed for durability and ideal for installation in flushometers that need repairs. It is the preferred choice for building contractors as they are used for routine maintenance and repair of tankless-toilet flush valves, which are commonly found in high-use public, commercial, and institutional restrooms.
|
|
P6000-ECA-WS1
|
Manual Flush valve closet repair kit come with a chemical & clog resistant filter which is constructed of chemical-resistant TPE material that resists chemical infiltration which is responsible for reduction of black diaphragms life. It is designed to fit Zurn AquaFlush.
|
|
P6000-ECA-WS1-RK
|
Zurn® 1.6 GPF AquaVantage® clog-resistant, triple-filtered bypass diaphragm rebuild kit for flush valve for Water Closets. This rebuild kit comes with diaphragm assembly (trip, disc, diaphragm and guide assembly), handle repair kit, vacuum breaker repair kit and tailpiece O-ring. Built using Zurn's Go Blue® thermoplastic elastomer, which offers superior chemical resistance for long-lasting quality and dependability. Reduce maintenance costs, water waste and expensive fixture replacements. Upgrade or retrofit your restroom.
|
|
P6003-H
|
3/4" SPUD ESCUTCHEON AND COUPLING ASSEMBLY
|
|
P6003-H26
|
3/4" FIBER WASHER
|
|
P6003-H27
|
3/4" SPUD RUBBER GASKET
|
|
P6000-ECR-WS1
|
Low Consumption Closet Kit P6000-ECR-WS1 has a 1.6 GPF/6.0 LPF low water consumption kit and features Zurn's "Go Blue" material, which offers superior chemical resistance for long lasting quality and dependability. This repair kit for toilet flusher includes relief valve, disc, diaphragm and guide assembly. It is designed to be used in Zurn Aquaflush.
|
|
P6000-ECR-WS1-RK
|
Manual Flush valve Closet Repair Kit -P6000-ECR-WS1-RK for Aquaflush series has a 1.6 GPF/6.0 LPF low water consumption kit. This kit comes with diaphragm assembly (relief valve, disc, diaphragm and guide assembly), handle repair kit, vacuum breaker repair kit and tailpiece o-ring. Built using Zurn's "Go Blue" material which offers superior chemical resistance for long lasting quality and dependability. It is ideal for use in Zurn AquaFlush flush valve.
|
|
P6000-L
|
Manual flush valve inside plastic cover P6000-L works with AquaVantage and AquaFlush flush valves. Built using chemical-resistant Go Blue material improves service life and the versatile design allows for use with other flush valves. Our Toilet flusher's inside plastic cover is designed to last up to 10x longer than the competitors’, reducing maintenance costs and extending their lifespan.
|
|
P6000-M9
|
Manual flush valve's Handle Repair Kit P6000-M9 is built using high quality thermoplastic elastomer TPE materials for chemical resistance. Since its manufactured using Chloramine resistant material, this toilet flusher's handle repair kit stands up to chloramine and other chemicals, lasting 10x longer than competitors' and keeping maintenance costs to a minimum.
|
|
P6000-M-ADA
|
Flush valve's handle repair kit P6000-M-ADA is ADA compliant and is built using high quality thermoplastic elastomer TPE materials for chemical resistance. Since its manufactured using Chloramine resistant material, this toilet flusher handle assembly provides longer useful product life.
|
|
P6000-MK
|
Manual flush valve's Handle Repair Kit P6000-MK is built using genuine Zurn flush valve parts ensure reliability. Since its manufactured using Chloramine resistant material, this toilet flusher's handle repair kit stands up to chloramine and other chemicals, lasting 10x longer than competitors' and keeping maintenance costs to a minimum.
|
|
P6000-VC
|
Manual flush valve's Vandal-Resistant Control Stop Cover P6000-VC is used with 3/4 in. and 1 in. manual flush valves. Since it’s made with Robust brass construction ensures strength and durability, this toilet flusher's Vandal-Resistant Control Stop Cover stands up to chloramine and other chemicals, lasting 10x longer than competitors.
|
|
P6000-H
|
Spud Coupling Assembly P6000-H for Manual flush valve is designed to fit AquaVantage® and Aquaflush® flush valves. It’s made of metal parts, the 1 ½-inch spud nut and escutcheon, are constructed of cast brass with a chrome-plated finish. The gasket and washer is made from chemical-resistant GO BLUE® material which last up to 10x longer than the other standard assembly.
|
|
P6000-H26
|
1-1/2" Fiber Washer
|
|
P6000-H27
|
3/4" Spud Rubber Gasket
|
|
P6000-J1
|
Tailpiece Assembly P6000-J1 for Manual flush valve is designed to fit AquaVantage® and Aquaflush® flush valves and its metal sleeve is constructed of cast brass with a chrome-plated finish. Our flush valve replacement parts and retrofit kits can be used to upgrade any diaphragm flush valve and are interchangeable with other standard flush valves. This assembly for toilet flusher has a 2 1/8” cast brass sleeve finished in polished chrome provides lasting durability while the friction washer is made with our long-lasting GO BLUE® material.
|
|